car door edge guards-HengJia Auto Parts 16FT(5M) door edge trim Rubber Seal Protector car edge trim with Fits Most Cars, No Glue Needed(Black Carbon Fiber);

Specifications:
Material: Electroplated glossyPVC
Product name:Rubber Edge Trim
ADVANTAGES:Waterproof, isolator noise, corrosion resistance, high temperature resistance, wear resistance,anti-aging,UV resistance.
Installation process:
Measure your door length (Measure Twice & Cut Once).
Cut the Door Guard to the length you just measured.
Slip the Door Guard into your door.
Repeat the process around each door.
How to install:
1.Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.
2.Uncover the tape from the tip of the lining (Ensure the tape is install inside the door).
3.Start from the top, insert the lining onto your door edge until the lining is fully seated.
4.Press the lining with your thumb along the door edge until it is fully seated.
5.Repeat step 4 until all edges are protected.
6.Use scissors to cut away unused lining for other door edges. 7.Let the lining dry up by itself and do not get wet for at least 12 hours.
Wide Range of Applications：
Can be used to van doors and machinery guards to computer cabinets ,protective trim, upholstery trim, fender flare trim, door edge trim, automotive trim, decorative trim and so on. . Packing:
1x 32FT Plating silver Rubber Edge Trim
2 packs of adhesion promoter