TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, for #8 to #12 Fastener Sizes (Pack of 10);

The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors. Specifications Ultimate Tensile Strength Values AnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" Drywall TA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicable TB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicable TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicableNot applicable159 lb. Ultimate Shear Strength Values AnchorDrill DiameterScrew Description1/4" Plywood3/8" Drywall1/2" Drywall5/8" Drywall TA5/16"#8 x 1-1/4"265 lb.Not applicableNot applicableNot applicable TB5/16"#8 x 1-1/2"Not applicable126 lb.167 lb.Not applicable TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicable237 lb. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin. Anchors provide reinforcement to a fastener that would otherwise have insufficient ho