Corner Step Bar LED Lights for Chevrolet/GMC/Chevy Rear Bumper Corner Step Bar Lamp with Running Reverse Brake Turn Signal Truck LED Tailgate Light Bar

REDLINE TRIPLE ROW LED Light Bar and the Tow Package Module

Vehicles with optional sensor equipment such as Rear Parking Sensor, Rear Camera, or Tow/Trailer Assist, sometimes have trouble communicating turn signal information via the stock 4-pin plug to the TRIPLE Row tailgate bar. You can solve this problem by adding this module between your TRIPLE ROW tailgate bar and your stock 4-pin trailer plug. The module does not affect your sensors in anyway and will allow you to install your TRIPLE ROW easily with the 4-pin plug.

However, we recommend that you use the included hardwire kit that comes with the TRIPLE Row and splice into your stock brake/turn signal wiring. If you go this route, you will not need the module, you will free-up your tow plug, and you can tell your friends that you installed it yourself!

*In addition, this module DOES NOT SOLVE vehicles equipped with BLIS or Blind Spot Sensors

If your vehicle uses BLIS, you will need to hardwire the TRIPLE Row

Without an adapter:

Aftermarket tailgate light bars don't function with your upgraded truck
Your Tow Package activates though nothing is being towed
Tailgate bar does not function

With the OPT7 LED Light Bar and Tow Package Adapter:

PWM Smartchip disables Tow Package automatic activation when tailgate light bar is plugged in, eliminating compatibility issues
Fix requires zero installation simply plug the tailgate bar power cord into adapter
Heat-free and IP67 waterproof material enables convenient mounting on any surface

Allows you to use the 4-pin tow plug to connect the TRIPLE ROW tailgate on vehicles equipped with Reverse Camera, Reverse Sensor, or Tow Package (Not for BLIS, or Blind Spot Detection)
For 2018+ vehicles with BLIS, we highly recommend HARDWIRE your TRIPLE ROW directly into the tail lights
Red Wire must be connected to a 12V power source to the car's positive battery (see PDF for guide below)
HEAT-FREE CASE – Stays cool during use and can be mounted on any plastic or heat-sensitive surface
IP67 WATERPROOF – Ready to take on the elements; water-resistant insulation for your peace of mind.
Allows you to use the 4-pin tow plug to connect the TRIPLE ROW tailgate on vehicles equipped with Reverse Camera, Reverse Sensor, or Tow Package (Not for BLIS, or Blind Spot Detection)
For 2018+ vehicles with BLIS, we highly recommend HARDWIRE your TRIPLE ROW directly into the tail lights
Red Wire must be connected to a 12V power source to the car's positive battery (see PDF for guide below)
HEAT-FREE CASE – Stays cool during use and can be mounted on any plastic or heat-sensitive surface
IP67 WATERPROOF – Ready to take on the elements; water-resistant insulation for your peace of mind.

Top WaffleMaker Reviews

OPT7 Redline Triple LED Tailgate Bar Rear Sensor Tow Assist 4-Pin Module V2 - for Pick up Trucks with Back-up Reverse Camera or Trailer Tow Assist Package Redesigned for 2018+ Vehicles;