Angle Grinder, GALAX PRO 6 Amp Grinder 4-1/2 Grinding Disc with 2 Abrasive Wheels, Side Handle, Safety Guard & Spanner for Disc Attachment, for Removing Paint & Mortar, Sanding, Cutting, Grinding;

GALAX PRO-A team specializing in the production of power tools, such as circular saw, mini circular saw, and so on. If you are a DIY lover, GALAX PRO is your good choice.

Application
Remove rust, grind mortar, smooth surfaces and cut metal piping.

Easy to change the accessory
Spindle lock promotes quick, easy disc changes, so you can seamlessly switch from grinding to polishing.

Maximum safety
This angle grinder provides maximum safety when in use thanks to its flexible tool-free protective guard adjustment feature.

Comfortable handling
Compact design and low weight for safe and controlled handling at all times. Our angle grinder also comes equipped with an auxiliary handle which can be mounted on both sides for extra comfort and lower vibration.

Specification
Amps: 6 amps
Rating: 120 volts AC
No-load speed: 12,000 rpm
Grinding wheel:4-1/2 inches（115mm）
Cutoff wheel: 4-1/2 inches（115mm）
Flap Disc: 4-1/2 inches （115mm）
Spindle thread: 5/8-inch-11

Attention
You should always hold the angle grinder out of line with your face and body while cutting.
Holding the angle grinder too rigidly can make it difficult to cut straight and can side load the disk. Side loading the disk (the face of the disk is grinding against the edge of the kerf) can cause the disk to wear out prematurely and damage the fiberglass mess that holds the disk together. Letting the disk follow the cut without forcing it will give the best results. Keeping the disk moving will help to prevent it from binding in the cut, and also make the cutting action more efficient.

Package Contents:
1 * GALAX PRO Angle Grinder
1 * Cutting Wheel
1 * Grinding Wheel
1 * Flap Disc
1 * Auxiliary handle
1 * Protect guard
1 * Spanner wrench for replacing
1 * User Manual
1 * Warranty Card