Er11 Spring Collet Set, 1/8" and 1/4" ER11 Collet Chuck for CNC Engraving Machine & Milling Lathe Tools (2 Pack);
Er11 Spring Collet Set, 1/8

Specification:
Model: ER11 1/8" & ER11 1/4"
Material: High Grade 65Mn Spring Steel
Outside diameter: 0.45" (11mm)
Precision:<0.012
Height: 0.69" / 0.68"

Package included:<...

Buy Now From Amazon

Specification:
Model: ER11 1/8" & ER11 1/4"
Material: High Grade 65Mn Spring Steel
Outside diameter: 0.45" (11mm)
Precision:<0.012
Height: 0.69" / 0.68"

Package included:
2 Pcs CNC ER11 Collet

  • Material: 65Mn, good elasticity, high precision
  • Model: ER11 1/8" & ER11 1/4"
  • Precision: <0.012; Height: 0.69"/ 0.68"; Outside Diameter: 0.45" (11mm)
  • Built in self-release design and tools will never get stuck in holder
  • For CNC milling lathe tool & Work holding engraving machine
  • Material: 65Mn, good elasticity, high precision
  • Model: ER11 1/8" & ER11 1/4"
  • Precision: <0.012; Height: 0.69"/ 0.68"; Outside Diameter: 0.45" (11mm)
  • Built in self-release design and tools will never get stuck in holder
  • For CNC milling lathe tool & Work holding engraving machine

Similar Products

ZXHAO ER11 A Collet Nuts Collet Clamping Nuts for CNC Milling Chuck Holder Lathe 2pcs2pcs ER11 A type Collet Clamping Nut for CNC Milling Collet Chuck Holder Lathe4PCS 90-Degree V Groove Router Bit, Gazeto Titanium Coated Carbide-Tipped 2-Flute CNC Engraving Bit Woodworking Chamfer Bevel Cutter, 1/4-Inch ShankSainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8HUHAO Spiral 60 Degree V Groove Engraving Tool Flat Bottom CNC Router Bits 1/8 Inch Shank for Aluminum MDF Hard Wood Copper 5PCSHQMaster CNC Router Bits 1/8 Router Bit 1 8 End Mill Flat Nose Carbide Endmill 2-Flute Spiral Upcut Milling Cutter Tool Set 17mm CEL, 38.5mm OAL for Wood Nylon Resin ABS Acrylic PVC MDF Hardwood 10PcsWhiteside 6210 CNC Spoilboard Surfacing Router Bit, 1/4uxcell ER11 A Type Collet Clamping Hex Nuts for CNC Milling Chuck Holder Lathe 2 Pcs