DESCRIPTION
One Stud Finders Tool, Multiple Uses
With just one tool you can accomplish so much. Four scanning modes provide multiple functions to get you through your busy day at home or at work. Use the Stud Scan to find studs up to 3/4-inch-deep; use Metal Scan to find metals such as rebar up to 2 1/4-inch-deep; AC Scan to find live AC wires up to 2-inches deep; and Deep Mode to scan walls up to 1 1/2-inch deep.
Simple, Fast, and Easy to Use
To get the most accurate results, make sure to calibrate the device. This can be automatically done by positioning the device on a wall where there are no studs, metals, or live wires. To use the device, press the button on the left side to power it, select a scanning mode, place the device flat on the wall or wooden floor, then move it slowly to one side.
LCD Display & Sound Alerts
When an object has been found by the Unihubys stud finder, the device will beep continuously to alert you. At the same time, the LCD display will also show an alert so there's no way you can miss a stud, metal, or wire when you're decorating your home or on the construction site. Make sure to mark the spot with a pencil so you don't have to look for it again!
Dimensions: 6.5" (L) x 2.8" (W) x 1.1" (H)
Battery: 9-volt battery required ( NO Included)
Weight: 5.4 ounces
HOW TO USE?
Step 1: Press the button at the left side of device to power it.
Step 2: Slide the button on the middle of device to select one scanning mode.
Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.
Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil.
DESCRIPTION
One Stud Finders Tool, Multiple Uses
With just one tool you can accomplish so much. Four scanning modes provide multiple functions to get you through your busy day at home or at...
Similar Products
