This is perfect choice when you renovate analog system to POE IP surveillance system, no need to rewire the coaxial cables to Cat5/6 cable, just use this small one port gadget and changed the front end(analog camera to IP camera) and back end(digital recorder to network recorder), big saving costs on labors and material, as well as project time! Try it, you know you make a good choice! Function Port: 1*10/100 Mbps Base-TX; 1*BNC Power Consumption: <2W Transmission Bandwidth: RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps PoE Protocol: IEEE802.3af, IEEE802.3at Network Standard: IEEE802.3, IEEE802.3u, IEEE802.3x Lightning Protection: Common Mode 4KV; Differential Mode 2KV Operating Temperature: -30°C-65°C Operating Humidity: 5%~95%
- 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices
- 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart.
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【PLUG-N-PLAY】The installation is very easy and no configuration or expertise is required. Just plug the EOC Receiver to an POE switch or POE injector, and then connect to EOC Transmitter via Coaxial cable or twist pair cable. IP camera or VoIP phone will then get POE power and data transmission from this EOC Transmitter
- 【IMPORTANT NOTIFICATION】 For multiple PoE over coax cables application in one system, it is highly recommended to use EOC-Switch KIT(ASIN: B0BMG63JZ6) to avoid potential signal interference.
- 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices
- 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart.
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【PLUG-N-PLAY】The installation is very easy and no configuration or expertise is required. Just plug the EOC Receiver to an POE switch or POE injector, and then connect to EOC Transmitter via Coaxial cable or twist pair cable. IP camera or VoIP phone will then get POE power and data transmission from this EOC Transmitter
- 【IMPORTANT NOTIFICATION】 For multiple PoE over coax cables application in one system, it is highly recommended to use EOC-Switch KIT(ASIN: B0BMG63JZ6) to avoid potential signal interference.