Geekstory Voltage Tester Sensor Measurement Detection Module DC 0-25V Terminal Sensor Module for Arduino UNO Mega Robot Smart Car Geekstory (Pack of 10);
Geekstory Voltage Tester Sensor Measurement Detection Module DC 0-25V Terminal Sensor Module for Arduino UNO Mega Robot Smart Car Geekstory (Pack of 10)

Description:
 This module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times, for Arduino analog input voltage up to 5V, then the input voltage of the voltag...

Buy Now From Amazon

Description:
 This module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times, for Arduino analog input voltage up to 5V, then the input voltage of the voltage detection module can not be greater than 5V × 5 = 25V (if used 3.3V system, the input voltage can not exceed 3.3Vx5 = 16.5V). Because for Arduino AVR chips used in 10 AD, so the resolution of the analog module is 0.00489V (5V / 1023), so the voltage detection module detects a minimum input voltage of 0.00489V × 5 = 0.02445V.

Specification:
 Voltage input range: DC0-25V
Voltage detection range: DC0.02445V-25V
Voltage Analog Resolution: 0.00489V
DC input connector: Terminal cathode connected to VCC, GND negative pole

Output interface:
 + 5V or 3.3V
- GND
S for Arduino AD pins

Package included:
 10 X Voltage Sensor

  • This voltage tester module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times.
  • The voltage detection module detects a minimum input voltage of 0.00489V × 5 = 0.02445V
  • Voltage input range: DC 0 - 25 V, Voltage Analog Resolution: 0.00489V
  • You can use it for Raspberry Pi via ADC but for need for programmatical corrections.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
  • This voltage tester module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times.
  • The voltage detection module detects a minimum input voltage of 0.00489V × 5 = 0.02445V
  • Voltage input range: DC 0 - 25 V, Voltage Analog Resolution: 0.00489V
  • You can use it for Raspberry Pi via ADC but for need for programmatical corrections.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.