RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Supports Drop Lids of Cabinets Kitchen 40lb/2pcs;
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Supports Drop Lids of Cabinets Kitchen 40lb/2pcs

HOW TO INSTALL LID SUPPORT HINGE?
-There are two mounting pieces: one side-mounting piece (A) for the inside wall of your cabinet and the other a top-mounting piece (B) for the inside of your cabinet door. (Hint: t...

Buy Now From Amazon

HOW TO INSTALL LID SUPPORT HINGE?
-There are two mounting pieces: one side-mounting piece (A) for the inside wall of your cabinet and the other a top-mounting piece (B) for the inside of your cabinet door. (Hint: the arm of piece A is longer than the arm of piece/
HOW TO INSTALL LID STAY INSTALL WHEN YOUR DOOR OVERLAPS THE CABINET FRAME (OVERLAY STYLE)

-On the inside cabinet wall, mark two points for drilling holes: one 38mm in from the front edge of the cabinet and 160 mm down from the inside top of your cabinet, and the second exactly 32mm below first one.

-Measure the amount of overlap for your cabinet door in millimeters. If installing 2 hinges, note that it may be different each side. Take that overlap dimension and add 12 to get inset dimension X. On the inside of the door, mark two points for drilling holes: one Xmm in from the side edge and 90mm from the top edge and another Xmm x 122mm.

HOW TO INSTALL LID SUPPORT HINGE WHEN YOUR DOOR IS SET INSIDE THE CABINET FRAME (FLUSH MOUNT STYLE

-Measure the thickness of your cabinet door in millimeters. Add 38 to it to get inset dimension X. On the inside cabinet wall, mark two points for drilling holes: one Xmm in from the front edge of the cabinet and 160 mm down from the inside top of your cabinet, and the second 32mm below the first one.

-Mark two points for drilling holes inside of the door,: one 12mm in from the side edge and 90mm from the top edge and another 12mm x 122mm.

NOTES FOR EITHER STYLE OF CABINET:

-Drill 1/8" pilot holes for all four points, being careful not to drill too deeply so that don't drill clean through the door or cabinet wall.

-Screw each mounting bracket into its respective place. The one on the inside cabinet wall should be oriented so that it protrudes out toward the door. The one on the inside of the door should be oriented so that the screws are toward the inside of the cabinet.


  • LID SUPPORT HINGE--The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required. Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support.
  • SOFT CLOSE LID STAY--Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Only soft close chest hinges support less than 40lbs, keeping lid hinges at same tension by adjustment will soft closing function work well.
  • MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Soft close will work well only adjust hinges by allen wrench.
  • WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
  • EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.
  • LID SUPPORT HINGE--The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required. Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support.
  • SOFT CLOSE LID STAY--Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Only soft close chest hinges support less than 40lbs, keeping lid hinges at same tension by adjustment will soft closing function work well.
  • MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Soft close will work well only adjust hinges by allen wrench.
  • WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
  • EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.

Similar Products

National Hardware N148-221 V570 Continuous Hinge in NickelNo-Mortise Chest HingeApexstone Soft Close Lid Support,Safety Lid Support,Soft Down Lid Support,Soft Close Lid Hinge,Set of 2Reliable Hardware Company RH-0540BK-2-A Set of 2 Chest Handle, BlackGas Spring, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Pressure:120N/26lb/12KG[2 Pack]Tulead Antique Cabinet Hinges 2-Inch Bronze Hinge Non-Mortise Hinge Interior Door Hinges Pack of 10 with Mounting ScrewsTulead Non-Mortise Hinges Chest Hinges Heavy Duty Hinges for Furniture 2Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2