XINGYHENG Multifunctional Bicycle Turning Light Bike Tail Lamp Red Color Light Brake Lamp for Safe Cycling Hiking Outdoor;

Product Specification:
How to operate?
1. The steering brake taillight is installed on the seat tube, which is suitable for bicycles with a diameter of within 27.2mm.
Please be careful when installing the battery. Do not reverse the polarity or break the wires inside.

2. The controller (horn) is installed with the left handle, which is suitable for bicycle installation with the diameter of
handlebars within 25.4mm.The length of the line between the controller and the taillight is about 126cm. Please pay attention
to the actual situation of your car when buying, and avoid the problem that the line is too short after buying home.

3. The brake light controller is installed on the front or rear brake cable (press the control button when braking, and the brake
light will be on), please install the brake switch to adjust good distance, lest because the distance is too short, and the brake too
hard and lead to the parking brake switch brake bad, please install the good after testing normal on the road again.

Specification :
Material: Plastic and electron component.

Main color: Black. The front light is white and the tail light is yellow and red.

Type: Tail Light.

Light dimension:13.2cm/5.2'' x 5.5cm/2.17'' x 3cm/1.2''(approx.)

Control cable length: 126cm/50''(approx).

Horn Dimensions: 8.5cm/3.35''x 6.2cm/2.44''x 3.4cm/1.34''(approx).

8 tune Horn: An integration of the 8-sound horn.

7 bright LED on Tail Signal Light :Left / right: 2 yellow LED, middle: 3 red LED.


Package including:
1pcs Multifunctional tail light
1pcs Electric horn ( controller)
1pcs Brake sensor
1pcs Multifunctional tail light mount
1pcs Controller mounting base

Tips:
1. The battery is installed in the tail light.
2.Keeping your safety in the darkness and early morning