Parameters:
Model/Name: LM2596S DC-DC Buck Module
Input voltage: 3.2V~46V (recommended for use within 40V)
Output voltage: 1.25V~35V
Output current: 3A (max.)
Conversion efficiency: 92% (highest)
Output Ripple: andlt;30mV
Switching frequency: 65KHz
Working temperature: -45°C~ +85°C
Dimensions: 43mm * 21mm * 14mm (length * width * height)
Description:
Input voltage range: DC 3.2V to 46V Recommended for use within 40V! (The input voltage must be more than 1.5V higher than the output voltage. Can not boost);
Output voltage range: DC 1.25V to 35V voltage continuously adjustable, high efficiency (maximum 92%) maximum output current is 3A;
Measured 12V input, 5V output current 1A load regulation rate is less than 1%;
High Precision: The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
With over-temperature and short-circuit protection, hence it is safe to use.
Note:
This is a buck module. The input voltage must be higher than the output voltage.
The input and output interface can not be reversed.
Keep it under 2.5 A and use the heat sink when working for long hours.
Package Including
10 * LM2596 DC to DC Buck Converter
- Input: DC 3.2V to 46V (The input voltage must be more than 1.5V higher than the output voltage. Can not boost);
- Output: DC 1.25V to 35V voltage continuously adjustable, maximum output current is 3A;
- High Precision: 36 u thickening circuit boards, high-Q inductance with LED indicator output;
- Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage,clockwise to step up voltage and counterclockwise to step down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-8 circles before the voltage starts ramping down, 1 circle means +/- 1V);
- Note: This is a buck module. The input and output interface can not be reversed. The input voltage must be higher than the output voltage.The input and output interface can not be reversed.Keep it under 2.5 A and use the heat sink when working for long hours.
- Input: DC 3.2V to 46V (The input voltage must be more than 1.5V higher than the output voltage. Can not boost);
- Output: DC 1.25V to 35V voltage continuously adjustable, maximum output current is 3A;
- High Precision: 36 u thickening circuit boards, high-Q inductance with LED indicator output;
- Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage,clockwise to step up voltage and counterclockwise to step down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-8 circles before the voltage starts ramping down, 1 circle means +/- 1V);
- Note: This is a buck module. The input and output interface can not be reversed. The input voltage must be higher than the output voltage.The input and output interface can not be reversed.Keep it under 2.5 A and use the heat sink when working for long hours.
