Product Details
Model: RS15-6
Rated Power: 93/67/46WÂ
Outlet: 3/4 inchÂ
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ - +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft);Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft);Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
