Wireless Remote Control Switch AC DC 12V 24V 36V Motor Forward and Reverse, 433Mhz 10A Remote Control Switch of Ask Learning Functional for Motor & More (2 Transmitter and 1 Receiver);

Working Voltage: AC/DC 12V-36V

Working Current: 48ma
Quiescent current:16ma
Max Load: 10A Relay
Size:100*60*30mm
Momentary--Jumper on "1&2", Press button"Up", the Motor Forward, Release is Stop. Press Button "Down", the Motor Reverse, Release is Stop.
Latched--Jumper on "3&4", Press button "Up", the Motor Forward, Press Button "Stop" is stop. Press Button "Up", the Motor Reverse, Press Button"Stop" is stop
If you don't need wire the Limited Switch, you need connect the UP Down and COM with a Line, we have connect it before we ship out ,if you need use it take away the line that is ok.
When the receiver output state is "Latched", we have set it 0.5s time delay for forwards and reverse, it is the Protection function.

Learning Code
1. Press the learning button on the receiver for 1 time,the learning indicator ON,Then press the transmitter button up for 1 time (first button default for forward) ,the learning indicator flash 3 times and ON,It mean the first button learning Successfully
2. Then press the transmitter button down for 1 time (second button default for reverse) ,the learning indicator flash 3 times and ON,It mean the second button learning Successfully
3. Then press the transmitter button stop for 1 time (third button default for stop) ,the learning indicator flash 3 times and ON,It mean the third button learning Successfully
4. Then press the transmitter button stop for 1 time again,the learning indicator flash 3 times and OFF,It mean all button learning Successfully

Press the learning button on the receiver for 5s,the learning indicator will flash 3 times and OFF , It mean all the transmitter code in the receiver have been cleared.


Package
1*Receiver
2*Transmitter