MD40 Magnetic Drill Press with 1-1/2" Boring Diameter & 2700lb Magnetic Force
The MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. of max force and ensures the machine will not move during the drilling process. A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
Specifications:
Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
Maximum Boring Diameter: 1-1/2 in. (40 mm)
Maximum Boring Depth: 7-1/2 in.
Tool Holder: 3/4-inch Weldon Shank
Spindle Speed: 670 RPM
Overall Weight: 30 lbs.
Usage:
Applicable to steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power, drilling rig, power construction, railway manufacturing etc.
Magnetic drill maintenance:
Caution:
1, Magnetic drill should be stored in a dry, clean, no corrosive gases and where children can not touch.
2, Save every part in the demolition of magnetic drill and when assembly it is good to put in the original parts.
3, Magnetic drill parts should be often injected into the lubricating oil and keep clean.
4, Magnetic drill maintenance should always be checked regularly, must check the power lines, plugs etc.
