LIBO 10 Frequency NFC Copier Reader Writer RFID Door Phone Key Duplicator EM4305 ID Card 125 KHz 13.56MHz for Access Control System;

Product Features:

1. 3.2-inch HD screen with clear display, ID/IC full functions, English operation sound, Digital Key input.
2. 4 on the 7th battery(the package not including battery),standard handset, easy to carry.
3. Comes decoding, direct preparation of various of smart card access door.


Package including:

1x ID/IC RFID Card Copier
1x USB Cable
5 x ID-125KHz RFID cards
5 x IC-13.56MHz UID keyfobs


How to copy the 125kHz RFID card:

1. Press the power button to turn on. When the screen shows the 'Disclaimer', press OK button.
2. Put the original card on the device's backside. Press SCAN button. The device automatically scans its frequency and read. The card number shows on the screen.
3. Take away the original card and put a writable EM4305 or T5577 card/key on the device's backside. Press WRITE button. The new card is written successfully.


How to crack the encrypted 13.56Mhz card:

1. If the 13.56 MHz card is encrypted, you should use the decoding software to crack it.
2. Connect the device to computer via the USB cable. Press the power button to turn on.
3. Then, don't press any button in the device. A removable disk pops up in your computer.
4. Open the disk. Find the manual and the decoding software. Run the software.
5. First, on the software interface, click the OK icon to accept the 'Disclaimer'.
6. Then, on the device, press OK button to accept the 'Disclaimer'. Now the device and computer connect successfully.
7. Put your original card on the device's backside. Click the software's 'Start decoding' to crack the password. It may take about 2 to 5 minutes to crack it successfully.
8. Then put one UID card on the device's backside. Press WRITE button. The new card is written successfully.
Warm Note: This device doesn't support to read, write and copy HID cards which are been encrypted!!!