RFCC TTG2 Car Camera Control Switch System for Toyota Touch 2/Entune Front View Camera Adapter;

RFCC TTG2 for Toyota combines 3 devices: a front view camera adapter (connect a front view camera), a rear view camera adapter (connect a rear view camera, if it was not installed by the manufacturer) and a front camera switch (use OEM steering wheel buttons as camera control buttons). The system offers fast and easy Plug&Play connection without the need to cut car wiring. All OEM functions continue working as before and there's no risk of voiding car warranty.
Additionally installed rear view camera should be powered from ACC line (first key turn), otherwise the camera input will be not active. Depending on the type of connected camera, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Only NTSC cameras are supported. Front view camera should be powered up only from the RFCC.

Features
Easy Plug&Play connection without cutting car wiring
Front/rear view camera connection to the OEM monitor
Automatic and manual modes
Use OEM steering wheel buttons to switch between cameras and factory screen
Car warranty is preserved, all OEM functions remain

Compatibility
Toyota Touch 2/Touch 2 with Go/Touch 2 with Go Plus
Corolla (Sedan)/Highlander/Hilux/Land Cruiser 150/Verso S 2013-; Camry 2014-2017; Auris/Avensis/Prius+/RAV4/Verso/Yaris 2014-; Alphard 2015-2017; C-HR/GT86/Mirai 2016-
Toyota Entune Audio/Entune Audio Plus/Entune Premium Audio
Corolla/Highlander 2013-; 4Runner/Avalon/Camry/Prius C (V)/RAV4/Sequoia/Sienna/Tacoma/Tundra 2014-; Alphard/Fortuner 2015-; C-HR/GT86/Mirai 2016-

Note! Panasonic/Pioneer monitors are supported, FujitsuTen aren't.
Package content and appearance may differ from those presented on the website. Please ask the sales specialist before purchase.