Kindly Tip:The package only contain a cold light wire driver, if you need a cigarette lighter wire drive, please buy it this page!
Car Interior Trim Light Strip Description: -Cold light must be connected with the drive to use, and can not be connected directly to the power supply.
-Cold light can use double-sided tape or glue fixed and then the car.
-Cold light can cut use, cut the part can be discarded, ownership length does not affect the use of the remaining part of the.
-Special quasi-cold light emitting principle and power consumption is small, so only specific power drive to run properly!
Q：What length do I need? A：General dashboard needs 40 to 119 inches long, the door needs 40 to 79 inches long and accurate need to check your car. Can be retained multi-point length, the excess can be directly cut or hidden.
- 1 meter = 40 inches
- 2 meter = 79 inches
- 3 meter = 119 inches
- 4 meter = 158 inches
- 5 meter = 197 inches
Q: How should I connect the cold light? A: There are many ways to use the cold light, such as connect the line of headlights, connect the original line or plug in the cigartte lighter adapter(not include), the item will work when turn on the headlights.
Car Interior Trim Light Strip Parameter: -Voltage: DC12V
-Length: 3M
Car Interior Trim Light Strip Package Including: -1xCar Interior Cold Light Strip
-1xCold Light Line Driver
