25CM Inner Pipe Specifications:
.Color: Black
.Material: PC
.Product Dimensions: 25*1.9*1.9cm
.Product Weight: 16.6g
.Package Dimensions: 25.5*2.4*2.4cm
.Package Weight:17.8g
.Packing: OPP Bag
Front Tube Mod Kit Specifications:
.Color: Orange
.Material: PLA
.Product Dimensions: 13.8*14*4cm
.Product Weight: 302g
.Package Dimensions: 15.8*16*6cm
.Package Weight: 312g
.Packing: OPP Bag
Package Content:
.4 x Picatinny Rail(10cm)
.12 x Zinc-plated Screw(M3, 4mm)
.1 x Modularized NO.171 Front Tube
.1 x STF Interface Component
.8 x Screw
.1 x Modularized NO.171 Hindsight
.1 x Modularized NO.171 Decorative Cap
.1 x Modularized NO.171 Top Cover for Main Body
- Come with a plastic inner pipe(25cm length, 1.9cm diameter), can be cut off as required to replace the original one. So that you can install the decorative cap of this mod kit smoothly.
- APPLICATION- this mod kit is ONLY suitable for Nerf N-Strike Elite Stryfe Blaster for people over 14 years old to operate.
- INSTALLATION- replace the original front tube orifice with STF interface component, then put front tube over it, also can use cooperatively with other parts like decorative cap, picatinny rail, hindsight and top cover, etc, makes the Nerf gun looks more cool.
- 3D PRINTING- with printing texture on surface, that has no smell of plastic. Also is light weight. It is made of environmental PLA material with low melting point, which should be prevented from heating, direct sunlight area or other high temperature environments to avoid deformating.
- NOTE- product disassembly requires professional disassembly capacity, do not dismantling or assembly violently ; Please ask for the instructions from us so taht you can operated more easier.
- Come with a plastic inner pipe(25cm length, 1.9cm diameter), can be cut off as required to replace the original one. So that you can install the decorative cap of this mod kit smoothly.
- APPLICATION- this mod kit is ONLY suitable for Nerf N-Strike Elite Stryfe Blaster for people over 14 years old to operate.
- INSTALLATION- replace the original front tube orifice with STF interface component, then put front tube over it, also can use cooperatively with other parts like decorative cap, picatinny rail, hindsight and top cover, etc, makes the Nerf gun looks more cool.
- 3D PRINTING- with printing texture on surface, that has no smell of plastic. Also is light weight. It is made of environmental PLA material with low melting point, which should be prevented from heating, direct sunlight area or other high temperature environments to avoid deformating.
- NOTE- product disassembly requires professional disassembly capacity, do not dismantling or assembly violently ; Please ask for the instructions from us so taht you can operated more easier.
