Use gloves if you find skin sensitivity
For best results, clean and de-grease surface, then roughen bond area prior to application
Twist or cut off required amount. Smaller amounts of putty used and lower temperatures will lengthen hardening and cure times.
To mix, knead thoroughly with fingers to a uniform color (average mixing time is 2 minutes). A quick way to knead the putty is on a hard and clean surface. If tacky on hand, wet hand slightly
Apply to surface to be repaired (within 2 minutes of mixing). The mixed epoxy does not exhibit high bond strength at this point but appears to be merely lying on the surface. Force into any cracks or holes to be filled and strike off excess material. On painted surfaces, the bond can only be as strong as the paint bond itself.
When applying to a damp, wet, or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.
For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening
Remove excess material before hardening begins. Once hardening begins, do not handle or reposition.
After 30-40 minutes the epoxy will harden and form a tenacious bond
After just 60 minutes many items are able to be put back into service
SPECIFICATION:
Condition : 100% brand new and high quality
Bottle Size(D*H): 2.7*1.1 in (Approx)
Quantity: 3 Tubes/Set(box)
Weight: 4 oz
Color: As picture shown
