***KSP Performance Wheel Spacers W/H High Quality Guarantee***
SPEC:
Upgraded class 10.9 ASE StudsThickness: 1 inch / 25 mm
Vehicle Bolt Pattern: 5x4.5'' / 5x114.3
Wheel Bolt Pattern: 5x4.5'' / 5x114.3
Thread pitch: M12X1.25
Hub/Center Bore: 66.1 mm
COMPATABILITY:(Please check your vehicle compatibility BEFORE buying):
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra
1995-1998 Nissan 240SX (Will NOT fit Base Models)
2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
2008-2013 Infiniti G37
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
IMPORTANT NOTICES:
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle
- Be sure to torque the lug nuts to manufacturer specifications
- Avoid using an impact wrench; improper usage may cause damage to components
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed
- Installation should only be performed by a trained professional
-If the studs do pass the face of the adapter, you will need to grind/cut them shorter. (This only applies to 1.5" adapters & smaller).
-For more details, please read over our installation instructions we put into our package.
- The 5 lug wheel spacers fit for most vehicle with 5x114.3mm bolts pattern, 66.1 bore 12x1.25 studs.Please refer to picture or description or “your garage” for more details. Recommended torque: 72-80 FT/LBS
- The design of hubcentric with lips more fit for the vehicle hub,reducing vibration at high speeds. Equipped with Thread Locker for fastening.
- Forged from 6061-T6 aircraft-grade aluminum,providing more aggressive and safe driving than casting wheel spacers. Heat treated and hardened 10.9 grade geomet bolts, not easy to break off and strip. Besides easy to install.
- Due to the center hole of the spacers with lips, it is only suitable for 66.1 bore vehicle. If the bolt length of your vehicle exceeds 25mm, you need to cut it off.
- We offer "30-day refund, 12-month free replace parts " service. We are committed to do business integrity quality after-sales KSP Support. If you have any questions,be free to contact us.
- The 5 lug wheel spacers fit for most vehicle with 5x114.3mm bolts pattern, 66.1 bore 12x1.25 studs.Please refer to picture or description or “your garage” for more details. Recommended torque: 72-80 FT/LBS
- The design of hubcentric with lips more fit for the vehicle hub,reducing vibration at high speeds. Equipped with Thread Locker for fastening.
- Forged from 6061-T6 aircraft-grade aluminum,providing more aggressive and safe driving than casting wheel spacers. Heat treated and hardened 10.9 grade geomet bolts, not easy to break off and strip. Besides easy to install.
- Due to the center hole of the spacers with lips, it is only suitable for 66.1 bore vehicle. If the bolt length of your vehicle exceeds 25mm, you need to cut it off.
- We offer "30-day refund, 12-month free replace parts " service. We are committed to do business integrity quality after-sales KSP Support. If you have any questions,be free to contact us.
