Use the amazing Apliquick stainless steel rods, fusible stabilizer, fabric pencils and fabric glue to make turned-edge applique easier to accomplish and with better looking results. Apliquick stainless steel rods are easy to use. The fork on one allows you to hold the small piece in place while the other beveled rod is used to brush the fabric over the edge of the foundation paper; use the pointed ends of your rods to flatten out any puckers or ripples so that everything lays nice and flat. Apliquick rods are remarkable Apliquick tools used to help make turned edge applique for large and medium pieces easier and are essential for miniature applique designs
Apliquick rods are
- Convenient size - each rod is approximately 7 ¾ inches long by 3/8-inch in diameter at the thickest point
- Easy to store with your other quilting tools or sewing tools
- Made of stainless steel for durability
Apliquick Fusible Stabilizer is
- White
- Approximately 1 square yard - 35 3/4 inches by a generous 36 inches. It has been cut from a bolt and gently folded to include with the kit
- Recommended for use with turned edge, glue stick method of applique in combination with Apliquick Rods and other Apliquick Tools.
- Fusible on one side - easily applied to the fabric with an iron
- Water soluble stabilizer - easily goes away with water. After it dissolves, you won't know it's there.
There are 2 Apliquick Fabric Marker Pencils included in this set.
The Avery Glue Stic is a .26-ounce stick.
