7 connectors, 5 plastic connectors & 2 metal connectors
Fits the following Raor models: E100(versions 10 and up), E125(versions 10 and up), E150(versions 1 and up),E175, eSpark(versions 41 and up), Trikke E2(versions 1 and up), razor launch
Replace Razor Part #:W13111612015. Model No: ZK2400-DP-LD (ZK2400-DP-FS)
Note: Model versions can be determined based on the 8-digit product ID code on your Razor product, can be found on the rectangular white sticker on the handlebar stem, side of the scooter deck, underneath the scooter, on the original battery charger, battery cover or on the bottom of the frame, on the cardboard box in which your scooter came.The last two digits are the version number (e.g. "01"=version 1, "02"=version 2, etc.)
Package includes
1 x Control module
- COMPATIBLE ONLY WITH: Razor E100 & E125 Versions 10 and up, E150 All Versions, and eSpark(All Versions), Trikke E2 (All Versions)
- DOES NOT Fit Razor Black Label E100, Power Core E100, E100 Glow Electric Scooters. The Razor Power Core E100, Razor Black Label E100, Razor E100 Glow and the Razor E100 scooter are different models and most parts are not interchangeable among them
- Replace Razor part #: W13111612015, Model No: ZK2400-DP-LD (ZK2400-DP-FS). 7 connectors (5 plastic connectors & 2 metal connectors), 4 pin throttle connector
- Version Specific Controller: The version number is located on the ID tag which may be found on the battery charger, battery box, handlebar stem, bottom of scooter, or other areas. The 7th and 8th numbers on the Razor ID tag are the version number. (For example: 01 = Version 1, 09 = Version 9, 14 = Version 14)
- Installation Tips: The E100 series Razor scooter is a PUSH START scooter. You need to push the scooter, twist the throttle and then the motor will engage. Please check the wiring to make sure that it is correct before installing the new controller
- COMPATIBLE ONLY WITH: Razor E100 & E125 Versions 10 and up, E150 All Versions, and eSpark(All Versions), Trikke E2 (All Versions)
- DOES NOT Fit Razor Black Label E100, Power Core E100, E100 Glow Electric Scooters. The Razor Power Core E100, Razor Black Label E100, Razor E100 Glow and the Razor E100 scooter are different models and most parts are not interchangeable among them
- Replace Razor part #: W13111612015, Model No: ZK2400-DP-LD (ZK2400-DP-FS). 7 connectors (5 plastic connectors & 2 metal connectors), 4 pin throttle connector
- Version Specific Controller: The version number is located on the ID tag which may be found on the battery charger, battery box, handlebar stem, bottom of scooter, or other areas. The 7th and 8th numbers on the Razor ID tag are the version number. (For example: 01 = Version 1, 09 = Version 9, 14 = Version 14)
- Installation Tips: The E100 series Razor scooter is a PUSH START scooter. You need to push the scooter, twist the throttle and then the motor will engage. Please check the wiring to make sure that it is correct before installing the new controller
