HOW TO USE
Â
â—STEP 1 - Adjust the machine
Make sure the tool is adjusted to your bottle. You can be tweaked the hex wrench to loosen and tighten the cutting blade for cutting. Also, you could loosen the screw and backstop to suit your bottle size.
Â
â—STEP 2 - Cut a line on the bottle
The bottle cutter does not really cut the bottle directly. Once the bottle is put in the proper place, clench it and turn it slowly so that you can carve a complete circle scoreline with the cutting wheel.
Be patient and careful, for clean and smooth cutting, you should etch every bottle a circle scoreline only ONCE. Never come back with a score or the cutting wheel will be damaged.
Â
â—STEP 3 - Heat&Cool the cutting line
Take out the bottle, dig it in boiled water for one to two minutes (must cover the scoreline), then pour cold water over the same scoreline. This cycle of hot and cold will cause the bottle to crack along the scoreline. The thicker glass may take additional cycles.(usually, it may take 3 or more times）
Â
â—STEP 4 - Smooth the cutting line
Be careful to snap the bottle into two with gloves. Then use a sandpaper or something else to smooth down the edge.
Â
Â
Packing including:
1x Bottle cutter
2x Polishing sandpaper
1x Packing box
1 x Gloves
1 x glass cutter
- 【SUITABLE WITH MOST GLASS BOTTLE】- Compared to most of the other bottle cutter machine which can only cut round bottles, this one is also suitable for square and oval glass bottles and jar, such as Vodka, Whisky, Martell, Hennessy, Brandy, Tapered, Champagne, Perrier, Pellegrino, Patron, Growler, Grand Marnier, Firestone.
- 【QUICK & EASY TO USE】 - 1) Roll adjusted bottle around once with consistent pressure on the blade; 2) apply heat to the scoreline with boiling water, hot air or candle flame, then cold water while pulling to separate; 3) Sand edges smoother.
- 【Smooth Cutting】 - The results will amaze you. Easily to get clean breaks every time after practices. Even thick champagne bottles break easily and smoothly.
- 【Long Time Use】 - Each blade is made of sharp and hard metallic-steel. The durability has been tested by 50,000 times cutting and still works great.
- 【Creative And Environmental protection】 - By your creative recycle ideas and handmade practice, decorate your exclusive beautiful life and help you do your bit for the environment protection.
- 【SUITABLE WITH MOST GLASS BOTTLE】- Compared to most of the other bottle cutter machine which can only cut round bottles, this one is also suitable for square and oval glass bottles and jar, such as Vodka, Whisky, Martell, Hennessy, Brandy, Tapered, Champagne, Perrier, Pellegrino, Patron, Growler, Grand Marnier, Firestone.
- 【QUICK & EASY TO USE】 - 1) Roll adjusted bottle around once with consistent pressure on the blade; 2) apply heat to the scoreline with boiling water, hot air or candle flame, then cold water while pulling to separate; 3) Sand edges smoother.
- 【Smooth Cutting】 - The results will amaze you. Easily to get clean breaks every time after practices. Even thick champagne bottles break easily and smoothly.
- 【Long Time Use】 - Each blade is made of sharp and hard metallic-steel. The durability has been tested by 50,000 times cutting and still works great.
- 【Creative And Environmental protection】 - By your creative recycle ideas and handmade practice, decorate your exclusive beautiful life and help you do your bit for the environment protection.
