Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer

Features:
1. This hotend kit suitable for Anet A2 / A8 3D Printer.
2. DIY 3D Printer replacement kit universal for damaged 3D printer hot end, special for Anet A2 & A8 printer.

Specifications:
--NTC 3950 Thermistor
Material: High Temperature Teflon (200â„ƒ)
Cable Length: Approx. 1m
Working Temperature Range: -40â„ƒ~+300â„ƒ
Resistance: at 25Â°C=100K ohm
Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring.

--Throat Teflon Tubing
Material: Stainless Steel & Teflon
Input Diameter: 1.75mm
Length: 30mm ï¼ˆsuits for A8 3d printerï¼‰
External Thread Diameter: 6mm

--Nozzle
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.4mm

--Heater
Material: Stainless Steel
Voltage: 12v
Power: 40w
Wire Length: Approx. 1m

--Heater Block
Material: Aluminum
Dimensions: 2 * 2 * 1cm / 0.8 * 0.8 * 0.4in(LWH)

Package List:
1 * 0.4mm MK8 Extruder Nozzle
1 * 30mm throat teflon tube
1 * Heater Block
1 * Thermistor
1 * cartridge heater

Nozzle: 0.4mm Extruder Brass Nozzle Print Head, Compatible with 1.75mm PLA ABS 3D printer;
Tube: 30mm Length 1.75mm Extruder Tube, made from Stainless Steel / Teflon. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish;
Heater block: Aluminium Material heater block, 2cm x 2cm x 1cm, comes with a necessary M6 screw. Working perfectly with ABS and PLA filaments;
heated tubing: 12V/40W high temperature resistance heater catridge, wire length Approx 1M/ 39.4in;
Thermistor: Pre-wired NTC3950 thermistor, 100K ohm, 1m in length. Working Temperature Range: -40°C~+300°C.
Nozzle: 0.4mm Extruder Brass Nozzle Print Head, Compatible with 1.75mm PLA ABS 3D printer;
Tube: 30mm Length 1.75mm Extruder Tube, made from Stainless Steel / Teflon. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish;
Heater block: Aluminium Material heater block, 2cm x 2cm x 1cm, comes with a necessary M6 screw. Working perfectly with ABS and PLA filaments;
heated tubing: 12V/40W high temperature resistance heater catridge, wire length Approx 1M/ 39.4in;
Thermistor: Pre-wired NTC3950 thermistor, 100K ohm, 1m in length. Working Temperature Range: -40°C~+300°C.

Top WaffleMaker Reviews

Anet Hot End Kit for A8 3D Printer, Includes 0.4mm MK8 Brass Extruder Nozzle, 30mm A8 Throat Teflon Tubing, Heater Block, NTC 3950 Thermistor, 12V 40W Heater;