Alto Professional TS308 | 2000 Watt 8 Inch 2 Way Powered PA Speaker with Integrated 2-Channel Mixer and Pole or Wedge Positioning Options;
Alto Professional TS308 | 2000 Watt 8 Inch 2 Way Powered PA Speaker with Integrated 2-Channel Mixer and Pole or Wedge Positioning Options

Exceed Expectations – Introducing the TS3 Series From Alto Professional Clarity, Precision, Power - The all-new Alto Professional Truesonic TS3 Series guarantees to meet even the most stringent of demands in a no-comp...

Buy Now From Amazon

Exceed Expectations – Introducing the TS3 Series From Alto Professional Clarity, Precision, Power - The all-new Alto Professional Truesonic TS3 Series guarantees to meet even the most stringent of demands in a no-compromise family of professional loudspeakers, solving virtually every performance and installation challenge with their premium build and core loudspeaker specifications. High-performance in every sense: The TS3 Series’ new transducers and amplifiers enable restriction-free, extremely loud and clear playback, precision engineered for outperformance of all loudspeakers in their class. The result? Loudspeakers that achieve a level of excellence and refinement that defies expectations and seamlessly adapts to any usage scenario. The Evolution of an Icon - Meet The TS308 Designed and tuned in the USA, Alto Professional’s TS308 boasts an all-new 2000-watt peak (1000-watt continuous) amplifier, a significant advance over the 1100-watt peak (550-watt continuous) amplifiers in its TS2 Series predecessor. With a reimagined 8-inch low-frequency driver fused with a new 1.4-inch horn-loaded high-frequency driver with a precision waveguide, TS308 has been painstakingly designed to play louder, handle more power and produce a level of clarity at higher SPLs that defies belief. With an extended-range frequency response and exceptional heat dissipation for impressive power-handling, plus thermal and transducer overdrive protection, TS308 guarantees to withstand the rigours of the road and secures your peace-of-mind, even at all-night-long concert levels. Setup Simplified With an updated control panel, an integrated 2-channel mixer, comprehensive contour control, a ground-lift switch and clearer control indications, TS308 makes your setup faster, more precise and roots your attention on dialling in optimal sound reinforcement. TS308 also packs all the ins and outs you’d expect – with dual XLR / 1/4-inch TRS combo inputs and an XLR link output, TS308’s arsenal of connectivity options guarantees to accommodate any setup scenario with ease. Versatile Reimagined Aesthetics New-look cosmetics and immense adaptability, TS308 leaves no stone unturned – its robust road-ready trapezoidal, injection-moulded, polypropylene enclosure with pole and wall-mount accommodation facilities fosters seamless assimilation to any situation where premium sound reinforcement is required. Plus, its lightweight specification makes this powered speaker the ultimate go-anywhere solution perfect for mobile DJ’s, bands, solo-artists and more. The Next-Generation Loudspeaker Standard 2000 watts of bi-amplified power, newly-designed drivers and easier, more satisfying controls and setup—the new TS3 range doesn’t merely meet your requirements, It makes you re-think what’s possible within the world of high-power loudspeaker performance. Defy your expectations and invest in loudspeaker performance you can trust – discover the TS3 Series from Alto Professional.

  • Superior PA Sound – 2000W (1300 LF plus 700 HF) active PA speaker with precision crossover and high-efficiency class D amplifiers
  • Driving Bass, Pristine Highs - 8-inch (305 mm) LF driver, 2.5-inch (76 mm) high-temperature voice coil; 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
  • Setup Simplified - Lightweight, PA cabinet design for easy transport, set up and installation; pole-mountable, wedge monitor, bracket installation or flown application with M6 suspension points
  • Ready for Any Situation - Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
  • Precision Engineered - Designed and tuned in the USA
  • This speaker features an inbuilt limiter to prevent blowing any of the internal drivers. Our TS3 series speakers feature a switchable Pre-Amp that is a part of the Volume/Gain potentiometer on the rear of the unit. Once the pot is past the 1 o’clock mark, the pre-amp input will switch to a Mic Level Pre from a Line Level Pre. It’s important to consider that these gain staged pots are parallel to the level of the output. Should users find the signal is distorting, the ‘Signal Limit’ LED will illuminate Red indicating the source incoming is too high, this signal will need to be attenuated to ensure the pre-amp is not ‘clipping’.
  • Superior PA Sound – 2000W (1300 LF plus 700 HF) active PA speaker with precision crossover and high-efficiency class D amplifiers
  • Driving Bass, Pristine Highs - 8-inch (305 mm) LF driver, 2.5-inch (76 mm) high-temperature voice coil; 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
  • Setup Simplified - Lightweight, PA cabinet design for easy transport, set up and installation; pole-mountable, wedge monitor, bracket installation or flown application with M6 suspension points
  • Ready for Any Situation - Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
  • Precision Engineered - Designed and tuned in the USA
  • This speaker features an inbuilt limiter to prevent blowing any of the internal drivers. Our TS3 series speakers feature a switchable Pre-Amp that is a part of the Volume/Gain potentiometer on the rear of the unit. Once the pot is past the 1 o’clock mark, the pre-amp input will switch to a Mic Level Pre from a Line Level Pre. It’s important to consider that these gain staged pots are parallel to the level of the output. Should users find the signal is distorting, the ‘Signal Limit’ LED will illuminate Red indicating the source incoming is too high, this signal will need to be attenuated to ensure the pre-amp is not ‘clipping’.

Similar Products

Gator Cases Heavy-Duty Speaker Tote Bag for Compact 8Pyle Universal Speaker Stand Mount Holder - Heavy Duty Tripod w/ Adjustable Height from 40” to 71” and 35mm Compatible Insert - Easy Mobility Safety PIN and Knob Tension Locking for Stability PSTND2Alto Professional Bluetooth Total | Professional XLR Equipped Rechargeable Bluetooth Receiver For Mixers and PA SystemsRockville TB8 Lightweight Rugged Speaker Bag Carry Case for 8GLS Audio 25ft Patch Cable Cords - XLR Male to 1/4On-Stage SS7745 Adjustable Subwoofer Attachment ShaftGator Cases Stand Carry Bag with 50Alto A- A-B Box (Bluetooth total)