Yuanshikj Industrial Retro Wall Mount iron Pipe Shelf Bracket Decorative Vintage Black Design
Specification:
SIZE: 28" high, 3 Tier, about 11.7 between each tier (excluding tees, elbows), depth 12" (without screw position),
The Width is customizable depends on yourself mind,
But we Not recommended over 60"ï¼›Material: Iron, Painted black matt.
Package Include:
2Pcs 3 Tier pipe shelf;
2Pcs 3 Tier pipe shelf;
（1Pcs standard quantity 3 Tier pipe shelf Include :
4x 90 Degree Elbows,
2x tees Valve,
6x Flange,
6x 12" Cross deep pipe,
4x 11.7" Vertical pipe,
Matching Screws ;）
(NOTE: The Wooden Board And Other Decorations Are NOT INCLUDE)
- Introduction: 28" tall, 3 Tier, 4pc 11 inch (without screw position) for vertical combination ; depth 12"pipe (without screw position) a total of 6 (and Flange combined to Wall) ; recommended to place the board less than or equal to 12 Inch width; 3/4" pipe diameter; 6 Flange, 4 elbows, 2tees, width can be customized according to their own ideas, but we do not recommend more than 60"; Iron painted black matt; installation please Refer to our picture;
- Applicable sites: Each purchase will include all of the parts needed (pipes and fittings) to complete this open pipe shelf system.You can use it “DIY” your's bookshelf、kitchen shelf、bathroom shelf、flowers shelf、and so,add extra space；
- Easy to Assemble: easy to put together, assembled the entire unit; leveled and screwed in the top- then worked way down, leveled then screwed into the wall, all around,The unit is steady.
- Quality Control Standards: strictly control standards ,There was a LOT of precise measuring to make sure that all of the screws lined up with the studs and all of the pipes were flush and level.
- NOTICE:This item just include pipe shelf hardware, planks not included , can be it spaced more or less depending on thickness of shelf boards and preference of spacing (size of shelf unit). Shelf brackets can hold 100 pounds if properly fastened into wood wall framing.
- Introduction: 28" tall, 3 Tier, 4pc 11 inch (without screw position) for vertical combination ; depth 12"pipe (without screw position) a total of 6 (and Flange combined to Wall) ; recommended to place the board less than or equal to 12 Inch width; 3/4" pipe diameter; 6 Flange, 4 elbows, 2tees, width can be customized according to their own ideas, but we do not recommend more than 60"; Iron painted black matt; installation please Refer to our picture;
- Applicable sites: Each purchase will include all of the parts needed (pipes and fittings) to complete this open pipe shelf system.You can use it “DIY” your's bookshelf、kitchen shelf、bathroom shelf、flowers shelf、and so,add extra space；
- Easy to Assemble: easy to put together, assembled the entire unit; leveled and screwed in the top- then worked way down, leveled then screwed into the wall, all around,The unit is steady.
- Quality Control Standards: strictly control standards ,There was a LOT of precise measuring to make sure that all of the screws lined up with the studs and all of the pipes were flush and level.
- NOTICE:This item just include pipe shelf hardware, planks not included , can be it spaced more or less depending on thickness of shelf boards and preference of spacing (size of shelf unit). Shelf brackets can hold 100 pounds if properly fastened into wood wall framing.
