Name:Bumper Lip
Size:long 250cm*wide 5.5cm/98.4 inch*2.16inch
Features: Universal for most cars/ trucks/ SUVS
Function: Guard Protection Rubber Skirt, anti-scratch and decorative
Scope of use:Stick it on front or rear bumper, body kit, side skirt, tail fins etc This product is made from high quality PVC Imported Carbon Fiber material, smooth cross section, flexibility:
Ultra light weight:
With adhesive, Perfect fit and easy to install
* Sturdy rubber material, soft and strong
You can also apply a liquid to shine it up and make it look beautiful colour!
Installation Guides:
1. Please keep the surface clean and dry, no sand/dust and put some adhesion promoter (Without) at it before installation.
2. Install the item from the middle, remove protective film from adhesive carefully.
3. radian Please cut a few triangles in adhesive tape, which is convenient for the turning.
4. Determine exact location of product, align carefully and then press firmly to insure proper adhesion.
5. more permanent attachment,you may use self-taping screws to secure the lip to the bumper.
6.Do not touch water after pasting within 72 hours
Package Includes:
1 * Roll Rubber Skirt 1 * Adhesion Promoter 1* carbon lip 1* installation manual 1*SAMURAI sticker 8* screw
- 【Dimensions】Length is 59 inches and width is 1.38 inches. Double-sided tape on the back for easy peel and stick installation.the universal Car rear spoiler can be cut if too long for your car
- 【High Quality Material】Made of soft and durable PU material, the surface is smooth and bright.
- 【Bendable】It can be bent freely, can be adjusted according to the radian, freely fit, and highly fit.
- 【Installation Steps】① Measure the length required for installation, and cut off the excess part. ② Make sure the installation location is clean and dry. ③Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). ④ Install the sleeves on both ends, and then glue them on slowly. ⑤ Finally, press firmly in all directions to make sure all places are tightly connected.
- 【Installation Steps】① Measure the length required for installation, and cut off the excess part. ② Make sure the installation location is clean and dry. ③Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). ④ Install the sleeves on both ends, and then glue them on slowly. ⑤ Finally, press firmly in all directions to make sure all places are tightly connected.
- 【Dimensions】Length is 59 inches and width is 1.38 inches. Double-sided tape on the back for easy peel and stick installation.the universal Car rear spoiler can be cut if too long for your car
- 【High Quality Material】Made of soft and durable PU material, the surface is smooth and bright.
- 【Bendable】It can be bent freely, can be adjusted according to the radian, freely fit, and highly fit.
- 【Installation Steps】① Measure the length required for installation, and cut off the excess part. ② Make sure the installation location is clean and dry. ③Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). ④ Install the sleeves on both ends, and then glue them on slowly. ⑤ Finally, press firmly in all directions to make sure all places are tightly connected.
- 【Installation Steps】① Measure the length required for installation, and cut off the excess part. ② Make sure the installation location is clean and dry. ③Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). ④ Install the sleeves on both ends, and then glue them on slowly. ⑤ Finally, press firmly in all directions to make sure all places are tightly connected.
