Bigetaige Universal Front Bumper Spoiler, 8.2ft/250cm Universal Carbon Fiber Front Bumper Lip Strip Splitter Spoiler;

Specifications:

- Size: 98-3/8"L x 2-9/16"W(250x6.5cm)
- Weight: 1.87Lbs

Installation method:

1. Convenient installation - the length can be adjusted to the best position of your car.
2. Clean the bottom of the bumper, preferably using alcohol to install the lip, which will ensure a firm combination with the bumper case.
3. Then peel off the double-sided tape and attach it to the front bumper lip. The degree of adhesion (adhesion or screw) can be selected. In order to achieve better adhesion effect, we recommend using screw and screws included in the package.
4. Install at the bottom of the bumper, starting from the end of the bumper.
5. Quick and easy way to add a front bumper lips, is almost any car aggression and reduce the appearance of flexible and durable materials, rubber carbon fiber design allows you to install the lower bumper.( The front lip of the car must be equipped with a self tapping screw, it is installed. Since the vibration wave of the automobile engine is relatively large, the screw will make (bumper separator/spoiler plate) stronger and will not fall off. Cut off the excess with scissors (note: don't clean your car within 48 hours, glue should be fixed after 12 hours)

NOTE: ★If you need a stronger, more permanent attachment, you amy use self-taping screws to secure the lip to the bumper.

Package Contents:
Front Bumper Lip*1
Screws*5