Cleaning Bottom Router Bits JESTUOUS 1/2 Inch Shank Diameter 1-1/2 Cutting Diameter 2 Flute Tipped Carbide Cutter Up Shear Flat Spoilboard Surfacing Planing Tool;
Cleaning Bottom Router Bits JESTUOUS 1/2 Inch Shank Diameter 1-1/2 Cutting Diameter 2 Flute Tipped Carbide Cutter Up Shear Flat Spoilboard Surfacing Planing Tool

Product description

  • Materail: Carbide
  • Cutting Diameter: 1-1/2"
  • Shank Diameter: 1/2"
  • Cutter Depth: 5/8"
  • Flute: 2

Application 

Buy Now From Amazon

Product description

  • Materail: Carbide
  • Cutting Diameter: 1-1/2"
  • Shank Diameter: 1/2"
  • Cutter Depth: 5/8"
  • Flute: 2

Application 

  • 1.Often used for cutting and smoothing a variety of materials from wood, plywood, MDF and other wood composites, plastics, fiberglass, and solid surface etc. 
  • 2.Use this bit to clean up previously cut dadoes and grooves, or for surfacing cuts. The up-shear configuration improves chip removal, while the cutting-edge orientation produces a smooth surface.
  • 3.Intended for broad,very shallow cuts,Exceptional finish,Carbide Tipped.

Tips

  • 1.All the router bits designed by clockwise rotation.
  • 2.Dont use it on non-wood material and metal,for example,steel,hard metal,stone,sand,etc.
  • 3.Use correct size chuck and fix tightly when using.
  • 4.Choose proper cutting rotate speed.
  • 5.Ware goggles and keep your belongings from the working bits.


  • Often used for cutting and smoothing a variety of materials from wood, plywood, MDF and other wood composites, plastics, fiberglass, and solid surface etc.
  • Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
  • 2 flute, carbide tipped.
  • Up-shear configuration improves chip removal, while the cutting-edge orientation produces a smooth surface.
  • Overlapped carbide produces a smooth flat bottom cut,Will level the bottom of a dado cut on all popular wobble blades.
  • Often used for cutting and smoothing a variety of materials from wood, plywood, MDF and other wood composites, plastics, fiberglass, and solid surface etc.
  • Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
  • 2 flute, carbide tipped.
  • Up-shear configuration improves chip removal, while the cutting-edge orientation produces a smooth surface.
  • Overlapped carbide produces a smooth flat bottom cut,Will level the bottom of a dado cut on all popular wobble blades.

Similar Products

Cleaning Bottom Router Bits JESTUOUS 1/4 Inch Shank Diameter 1 Cutting Diameter 2 Flute Carbide Tipped Cutter Up Shear Flat Spoilboard Surfacing Planing Tool1/2-Inch Shank 2-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit Woodwork Cutter for CNCCNC Spoilboard Surfacing Router Bit 1/2Allway Tools Series Allway 10031 HM1 1 Gallon Helix Paint Mixer, SilverDCT Wood Router Table Collet Bit 1/2 to 2-1/4in Extension for 1/2in Bits - For Raising Table-Mounted Router BitsCMT 796.001.00 Router Collet Chuck Extension for 1/2-Inch Collets, 1/2-Inch ShankYonico 14976 1-1/2-Inch Diameter Bottom Cleaning Router Bit 1/2-Inch ShankRubio Monocoat Zero VOC 2 Component Oil Finish Pure (350 mL)