12v Dc Small Water Pump, 63 GPH Mini Submersible Pump for Small Water Fountain, Water fall, Aquarium, Pet drinking System, irrigation system and other Water circulation applications [Upgraded Version];

Important Tips:

Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!

Specifications:

Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm

Note:

1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;