[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 12V 3D Printer 1.75mm Filament / 0.4mm Nozzle;

Hotend is equipped with NTC3950 thermistor and 12V 40W heater

This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate.

NTC 3950 Thermistor parameters:

• NTC3950 thermistor temperature table now incuded in Marlin firmware
• Small Size: 1.25mmx2.0mm glass bead
• High accuracy: 1%
• Resistance value at 25°C=100K
• Wiring insulation: high temperature teflon/PTFE
• Wiring length: 1 meter

Package contents:

1 x V6 All Metal hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
1 x Silicone heat protection sock
1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic Straight Fitting to connect to extruder cold end.
1 x Thermal Protection Silicone Sock