True Composites 2 Part Urethane Pour Foam, 2 Lb Density, Marine Foam for Boat Flotation, Sound Proofing, Foam Insulation, Post Hole Foam, 1 Gallon Kit;

This is 2 lb. density urethane flotation foam is ideal for marine applications such as soundproofing, insulating, filling voids, and adding buoyancy. This two part expanding foam fills cavities and can be shaped to form to keep your boat or dock floating. Foam cures to a rigid form containing 95 to 98% closed cell structure so it is unaffected by gasoline, oil, fresh or salt water, or solvents. Even after prolonged exposure, our flotation foam maintains buoyancy. Mix at a 1:1 resin to hardener ratio to ensure equal, even distribution and the strongest possible foam. This fast acting formula allows approximately twenty seconds for mixing and pouring, as foam will be set in place within 10 minutes. It's ready for use in just hours. 2 lb foam has a flotation range of 100-120 lbs per quart. 2 lb foam expansion: A 1/2 Gallont Kit expands to approximately 2 cubic feet; A 2-Gallon Kit expands to approximately 8 cubic feet. All expansion rates and times given are temperature critical. Temperatures below 75 degrees F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 degrees F or above. Accurate measuring is critical. Once fully cured, it can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.