Zircon Stud Finder A250c Pro 4 in 1 MultiScanner; 3-color LCD Screen Stud/DeepScan Modes Detect Edges/Center of Wood/Metal to 1 ½” Metal Mode Lath & Plaster AC Detects Live, Unshielded AC US Model;

The MultiScanner A250c is Zircon’s newest electronic stud finder, metal detector and live AC scanner with a multicolor LCD screen that is sold exclusively on Amazon. The A250c is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A250c has a 4-mode selector switch making it easy to change functions while the advanced Color Trip Display allows you to easily distinguish the scanning mode by the color of the screen. The ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets. The MultiScanner A250c includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner’s display lights green in its 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A250c scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode is indicated by a blue screen locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. The A250c is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when using StudScan, DeepScan and Metal Scan Mode. When live wiring is detected in these three modes, the screen will light, or flash, red. In addition to Wire Warning Detection, the A250c also includes AC Scan Mode that is distinguished by a constant red display. This mode detects, locates, maps, and traces live wires. The Zircon MultiScanner A250c is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MultiScanner A250c, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.