Jeep Wrangler JKU/JLU Black Delrin Plastic Rear Seat Recline Kit with Bolts and Washers

Please verify the setup fits your vehicle before you purchase,it fits 2007-2018 Jeep wrangler JK and JKU.
SPECIFICATIONS
1.Fits Jeep Wrangler JK 2007-2018, need custom to fit other vehicle.
2.One touch switch with eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight
3..8 gauge power leads with crimped and soldered terminal for connection to the battery
4.Diodes to protect sensitive accessories such as LED lights from "field collapse"
5.Max output: 100 Amp
6.Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.0VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
7.Mounting bracket for Jeep Wranglers
8.Plug and Play
9.40 Amp Relay
Want more switch covers , just click https://www.amazon.com/dp/B07GD9G314

Compatible with Jeep Wrangler 2007-2018 JK & JKU . Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.0VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
Diodes to protect sensitive accessories such as LED lights from "field collapse"
One touch switch and eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight
8 gauge power leads with crimped and soldered terminal for connection to the battery
Waterproof power module box .Plug and Play. a grounding bus bar is needed for grounding your accessories if you don't want to use studs on the frame.
Compatible with Jeep Wrangler 2007-2018 JK & JKU . Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.0VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
Diodes to protect sensitive accessories such as LED lights from "field collapse"
One touch switch and eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight
8 gauge power leads with crimped and soldered terminal for connection to the battery
Waterproof power module box .Plug and Play. a grounding bus bar is needed for grounding your accessories if you don't want to use studs on the frame.

Top WaffleMaker Reviews

Voswitch Overhead 8-Switch Pod/Panel with Control and Source Box Green Backlight Compatible with Jeep Wrangler JK JKU 2007-2018;