Bluewater Chemgroup Clean Smoke, All Natural Pipe-Bong-Bubbler, Glass, Metal and Ceramic Cleaner-Resin and Tar Remover;

Clean Smoke Bong Cleaning Solution

Bong Cleaning Directions:

Small bongs use 1 oz. of Clean Smoke in up to 4 oz. of water.-Medium bongs use 2 oz. of Clean Smoke in up to 8 oz. of water.-Large bongs use 3-4 oz. of Clean Smoke in up to 16 oz. of water.Empty bong. Remove bowl from downstem and plug downstem. Fill bong to half way between bowl height and carb hole. Add proper amount of Clean Smoke and stir/shake closing carb hole with finger to prevent spillage. Let sit for 15-30 minutes. Empty cleaning solution down the drain. Repeat for heavily soiled bongs. Refill bong with fresh water and rinse thoroughly. Repeat as needed until no suds are present in rinse water. Refill with fresh water replace bowl and enjoy a clean smoking experience. 

Glass Pipe Cleaning Directions:Mix 8 oz. of Clean Smoke with 32 oz. of hot water in a container approximately 8x8 inches and 2 inches deep. Place glass pipes in solution (be sure pipes are submerged in solution (be sure pipes are submerged in solution). Let sit for 15-30 minutes. Light agitation or scrubbing may be necessary for excessive buildup. Remove glass pipes and pour the cleaning solution down the drain. Rinse glass pipes until no suds or foaming is present. Use as normal.