6Pcs Center Drill Bits,Drillpro HSS Lathe Mill Center Drill Bits,60 Degrees Countersink Drill Bits for Steel, Metal, Iron, Alum, Carbon Steel, Brass,Wood,3/76” 1/17” 1/9” 6/61” 1/8” 1/5”;

6pcs Drillpro HSS Center Drill Bits for Steel, Metal, Iron, Alum, Carbon Steel, Brass, and Wood

Specification:
A set of Center Drill Bits includes the 6 sizes:
#1 with 1/6" body diameter & 0.04" drill tip diameter
#2 with 1/6" body diameter & 0.06" drill tip diameter
#3 with 1/5" body diameter & 0.08" drill tip diameter
#4 with 1/4" body diameter & 0.10" drill tip diameter
#5 with 1/3" body diameter & 0.12" drill tip diameter
#6 with 1/2" body diameter & 0.20" drill tip diameter

Usage:
●Center drill bits are used to drill a conical hole for a lathe center in order to make a starting point for a standard twist drill so as to prevent the twist drill from walking.
●Center drill bits are also used for producing center holds in components or work-pieces with required machining between centers.

Instructions:
◀Choose a match type of center drill bits according to the hole type and the straight hole size of the machined parts.
◀The heat treatment hardness of center drill bit is between 63-66HRC appropriate.
◀Wash the rust-proof grease before using the center drill bit, so as to avoid chip sticking on the cutting edge.
◀The surface of work-piece should be smooth to avoid center drill bit being damaged.
◀The center drill bit should achieve the required position accuracy before drilling.

Notes:
●Stop immediately in the processing of abnormality when using the center drill bit and find out the reason before processing;
●Pay attention to the condition of center drill bits, especially the wear and tear of the cutting edge and timely repair;
●Clean the center drill bit and use oil after using, keep center drill bits properly.

√Why Choose DRILLPRO
▶Good quality and reliable brand.
▶Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
▶24-hour feedback excellent customer service.