MidTen Bore Sight Cal Red Dot Boresighter for 223 5.56mm Rem Gauge with 2 Sets of Batteries;
MidTen Bore Sight Cal Red Dot Boresighter for 223 5.56mm Rem Gauge with 2 Sets of Batteries

Specification
-- Length: 44.5mm; Tail width: 9.5mm; Head width: 6.3mm
-- Laser Wave length (nm:) 640 to 660
-- LED Type: visible red laser
-- Power: <5 mW
-- Construction: Brass
-- Sightin...

Buy Now From Amazon

Specification
-- Length: 44.5mm; Tail width: 9.5mm; Head width: 6.3mm
-- Laser Wave length (nm:) 640 to 660
-- LED Type: visible red laser
-- Power: <5 mW
-- Construction: Brass
-- Sighting Range: 15 to 100 yards
-- Dot Size: 2 inches at 100 yards
-- Operation: On/Off End Cap
-- Temperature: -10℃ to 40℃
-- Battery Type:6 X AG3 (Included)

How to use the bore sight?
1.Unscrew the back cap from the bore sight by turning counter clockwise
2.Stand the bore sight on a flat surface with the laser side pointing down
3.Insert batteries (+ side up) inside the rear opening
4.Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on)
5.Place in your rifle's chamber and close the bolt
6.To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle's barrel upward (always practicing safe firearm practices)
7.Unscrew the back and remove the batteries to turn the unit off

Package included
-- 1 X Bore Sight
-- 6 X AG3/LR41 Batteries


  • Class IIIA laser, less than 5mW
  • Made to fit the .223 caliber, caliber specific.
  • Comes with 2 sets upgraded batteries (6 AG3 batteries) which can last one and half an hour.
  • Easy to sit perfectly in the bore. Sturdy brass construction. Fast zeroing the optics.
  • The MidTen bore sight laser is factory zeroed to ensure accuracy and helps you quickly zero in the optic. High accuracy to reduce cartridges and shells wasted, sighting range of the bore sight is 15 to 100 yards.
  • Class IIIA laser, less than 5mW
  • Made to fit the .223 caliber, caliber specific.
  • Comes with 2 sets upgraded batteries (6 AG3 batteries) which can last one and half an hour.
  • Easy to sit perfectly in the bore. Sturdy brass construction. Fast zeroing the optics.
  • The MidTen bore sight laser is factory zeroed to ensure accuracy and helps you quickly zero in the optic. High accuracy to reduce cartridges and shells wasted, sighting range of the bore sight is 15 to 100 yards.

Similar Products

MidTen .243 308 Bore Sight Red Dot Boresighters 308 with Three BatteriesMidTen 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with Three BatteriesCVLIFE 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return with AdapterMidTen 30-06 25-06 and 270 Cartridge Laser Bore Sighter .270 Red Laser Bore Sight Cal Rem GaugeVortex Optics Strikefire II Red Dot Sight - 4 MOA Red/Green DotMidTen in Chamber Bore Sight Cal Red Dot Boresighter 12-GaugeCVLIFE Two Points Sling with Length Adjuster Traditional Sling with Metal Hook for Outdoors BlackVortex Optics VMX-3T Magnifier with Built-in Flip Mount