A good quality pre-wired control panel assembly for a telecaster type guitar.
The panel is 160 x 32mm and is fitted with a three way pickup seletor switch, volume and tone controls with metal knobs.
The circuit consists of a 250kOhm type B volume control pot and a 250kOhm type A tone control pot which uses a 47nF capacitor to ground.
The 3 position switch allow switching between neck pickup, bridge pickup or both. The suggested switch wiring is shown in the diagram below.
The following connections are required:
- Connect the bridge pickup core to switch pins 6 and 7.
- Connect the neck pickup core to switch pins 1 and 2.
- Connect the bridge and neck pickup screens to the potentiomete cases (ground).
- Connect the flying lead core and screen to the jack socket.
A good quality pre-wired control panel assembly for a telecaster type guitar.
The panel is 160 x 32mm and is fitted with a three way pickup seletor switch, volume and tone controls with metal knobs.
The circuit consist...
Similar Products
