Jebao Programmable Auto Dosing Pump DP-4

Product Features:
Product Name : Water Level Sensor;Contacts : NO+NC;
Max Contact Rating :10W;Max Switching Voltage :100V AC/DC;Max Switching Current :0.5A;Max Load Current:1.0A; Max Breakdown Voltage: 110V AC/DC; Max Carry Current :1.0A
Max Contact Resistance:100M¦¸;Temperature Rating: -30~+125 degree centigrade;Max Load Pressure: 0.2MPA;Net weight:43g
Installation: top or bottom mounted vertically ; Use medium: water, oil, chemical medium
Product Specification:
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank,
freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers,
carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever
your project may be. It can be easily converted from normally open to normally close by invertin the float. Note: because the current that the switch can carry is much little(0.5A),
you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.

Product Name : Water Level Sensor;Contacts : Wire length 12 inch Product length：4inch NO+NC;Max Contact Rating : Max Contact Rating:10W
It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device,but need to be used with relay
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm. Material:Stainless Steel.
The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water's rise or fall.
Product Name : Water Level Sensor;Contacts : Wire length 12 inch Product length：4inch NO+NC;Max Contact Rating : Max Contact Rating:10W
It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device,but need to be used with relay
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm. Material:Stainless Steel.
The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water's rise or fall.

Top WaffleMaker Reviews

Elecall 4"Float Switch Stainless Steel Tank Water Level Sensor 110Volt Wire Length 12inch (ES10010 2pack);