Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller;

Description:
Power Supply:DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V
Consumption:Capture 50mA@5V
Receiving Format: GPS, GLONASS,Galileo,BeiDou,QZSS and SBAS
Receiving Channel:72 Searching Channel
Receiving Sensitivity:Trace -167dBm , Capture-148dBm
Positioning Time:Cold Start: avg26s , Warm Start: avg25s, Hot Start: avg3s
Level Positioning Precision: 2m At Open Wind
Output Frequency:1Hz-10Hz,Default 1Hz
Speed Precision: 0.1 m/s (Without Aid)
Acceleration Precision :0.1 m/s (Without Aid)
Dynamic Characteristics:Max Height:18000m, Max Speed:5153m/s,Max Acceleration:4G
UART Interface:UART Port:TXDA and RXDA
Support Rate:4800bps to 115200bps,Default 38400dps
Working Temperature:-40℃-+85℃
Storage Temperature:-40℃-+85℃
Size:28mm x 28mm x 10mm
The Module's Pins:SDA,GND,TX,RX,VCC,SCL

Features:
GPS Module,Dual Module Compass
With electronic compass IC HMC5883L
1.25mm spacing between the 6pins patch seat

Note:
Can not use for flight control with SCM, but it is suitable for Open source flight controller.
GPS Program Set up documents and instructions:Please click here BN-880 GPS Configuration files

Package Included:
1x BN-880 GPS Module
1x 15cm Cable