Chrome Stainless 7 Spline Wheels Lug Nuts
(Free exchange if paint off, rusty spots or other problems in 16 months)
Thread pitch: 9/16 x 18 (32pcs)
Overall heigth: 2" (51mm)
Max width: 0.91" (23mm)
Scokey key hex size: 13/16"(21mm) and 7/8"(22mm)
Important Important Tips:
A: for aftermarket wheels
fits all most all aftermarket wheels(super heavy truck not recommended)
B: for OEM wheels
- must 60 degree conical/cone nuts seat as fifth picture shown
- the wheel nuts hole must less than Max width 0.91" so our nuts can get through the hole
C: for installation
- torque it with our socket key firstly( 1 key as gift and buy more replaceable keys from us)
- tighten again with 21or 22mm hand wrench(you can buy new wrench or measure your oem wrench)
- re-tighten again after 100 miles and then 1000 miles
D: free exchange if paint off or thread pitch mess up, reply less 24h
E: how to judge OEM wheels or aftermarket wheels as newbie
- Â a new vehicle from retailer should be OEM
- Â special brand logo on OEM wheelsÂ
Primary Vehicle Chart
Dodge Dakota 2005-2011
Dodge Ram 1500 2002-2010
Dodge Ram 2500 1994-2011
Dodge Ram 3500 1994-2011
Dodge Ram SRT 2004-2006
Ram Chassis cab 2013-2018
(Part model shown because of character limited and contact us with your model if not sure)
- Fitment: Vehicles with wheel lug nuts requiring a 9/16''-18 thread(8 lugs) and take a conical 60 degree seat, fit most of the Aftermarket Wheels, please check the seat type of your original lug nuts firstly before placing your Order.
- Specification: Thread pitch 9/16-18, 60 Degree cone/conical seat, Overall tall 2" (50mm), Width 0.91"(23mm), Closed end, 1 Socket keys 13/16"(21mm) and 7/8"(22mm) Hex 32 packs((handwrench recommended, don't use the impact tool)
- Performance: One-piece structure design, which is more safer while you are installing the lug nuts and all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others.
- Premium Material: Cold Forged Alloy Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread. Chrome plated can greatly improves rust&corrosion resistance and prevent the outer layer peeling easily.
- Brand Promise: We hope that dynofit can make your shopping experience enjoyable. If you have any questions, we will provide you with assistance and service
- Fitment: Vehicles with wheel lug nuts requiring a 9/16''-18 thread(8 lugs) and take a conical 60 degree seat, fit most of the Aftermarket Wheels, please check the seat type of your original lug nuts firstly before placing your Order.
- Specification: Thread pitch 9/16-18, 60 Degree cone/conical seat, Overall tall 2" (50mm), Width 0.91"(23mm), Closed end, 1 Socket keys 13/16"(21mm) and 7/8"(22mm) Hex 32 packs((handwrench recommended, don't use the impact tool)
- Performance: One-piece structure design, which is more safer while you are installing the lug nuts and all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others.
- Premium Material: Cold Forged Alloy Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread. Chrome plated can greatly improves rust&corrosion resistance and prevent the outer layer peeling easily.
- Brand Promise: We hope that dynofit can make your shopping experience enjoyable. If you have any questions, we will provide you with assistance and service
