WILLBOND Long Shaft High Torque Clock Movement Clock Motor with 7 Inch Spade Hands (Shaft Length 9/10 Inch/ 23 mm);
WILLBOND Long Shaft High Torque Clock Movement Clock Motor with 7 Inch Spade Hands (Shaft Length 9/10 Inch/ 23 mm)


Compatible clock:
This set of quartz clock mechanism is applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, etc., can apply to some DIY craft clock as well.

Easy to use and accura...

Buy Now From Amazon


Compatible clock:
This set of quartz clock mechanism is applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, etc., can apply to some DIY craft clock as well.

Easy to use and accurate timing:
High torque clock replacement movement parts with metal hook, convenient to install and use.

Specifications:
Material: plastic and aluminum
Power: 1 x 1.5 V AA battery (not included)
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.63 inch)
Second cap size: approx. 7 mm (0.3 inch)
Total hour hand length: approx. 124 mm (4.9 inch)
Total minute hand length: approx. 256 mm (10.1 inch)

Length from center hole to tip:
Hour hand: approx. 115 mm/ 4.5 inch
Minute hand: approx. 175 mm/ 7.0 inch

Package includes:
1 x Quartz clock movement
1 x Second cap
1 x Minute hand
1 x Minute nut
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut

  • Clock quartz movements: high torque jump second movement, drive long clock hands (10 mm to 450 mm)
  • Movement size: the total shaft length is 23 mm (9/ 10 inches), thread length is 15.2 mm (3/ 5 inches), suit for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
  • Center hole to the tip hand length: hour hand is approx. 115 mm (4.5 inch); Minute hand is approx. 175 mm (7.0 inch); Second caps is approx. 7 mm (0.3 inch)
  • Package detail: includes the hardware and 2 clock hands in a cardboard box with instructions, make you DIY clock project easily
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel in case of bend them
  • Clock quartz movements: high torque jump second movement, drive long clock hands (10 mm to 450 mm)
  • Movement size: the total shaft length is 23 mm (9/ 10 inches), thread length is 15.2 mm (3/ 5 inches), suit for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
  • Center hole to the tip hand length: hour hand is approx. 115 mm (4.5 inch); Minute hand is approx. 175 mm (7.0 inch); Second caps is approx. 7 mm (0.3 inch)
  • Package detail: includes the hardware and 2 clock hands in a cardboard box with instructions, make you DIY clock project easily
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel in case of bend them

Similar Products

Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)Hicarer High Torque Clock Movement Mechanism with 230 mm/ 9.1 Inch Long Hand (Shaft Length 9/10 Inch/ 23 mm)EMOON Clock Movement Mechanism with 3 Pack Clock Hands, Silent Sweep Quartz Clock Motor Kit, for Clock Repair, Custom ClockHigh Torque Quartz Clock Movement Clock Replacement Mechanism with 12 Inch Long Spade Hands for DIY Clock (Black, Shaft Length 1/10 inches/ 23 mm Shaft Length)Mudder Long Shaft Clock Movement, 4/5 Inch Maximum Dial Thickness, 1-1/5 Inch Total Shaft LengthMudder Quartz Clock Movement with Hands to Fit Dials up to 40 cm/ 15.7 Inches in Diameter (Shaft Length 3/5 inch/15mm)Include Hands Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts ReplacementHicarer High Torque Clock Movement Mechanism with 230 mm/ 9.1 Inch Long Hand (Shaft Length 4/5 Inch/ 20 mm)