Vincos 20 Ft 6AN AN6 (3/8") Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose;

Specification:
**Color:Silver
**Size:AN-6
**Inner diameter(ID): 8.7 mm 0.342inch
**Outside diameter(OD):13.89 mm 0.546inch
**Inner hose Materail:CPE synthetic
**Outside Materail:Stainless Steel
**Working Temperature:-40F to 248F (-40°C to + 120°C) under most operating conditions.
**Working Pressure:1015PSI
**Burst pressure: 6090 PSI

Application:
1.For use with fuel systems, methanol, oils, lubricants, coolant system and vacuum applications.
2.Suitable for fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.
3.This hose isn't suitable for brake fluid and is not to be used near extreme heat sources such as a turbocharger.

Package Includes:
20Ft Stainless Steel Braided Fuel Hose

How to Cut:
For cutting your new steel braided hose to length you will need:
* Cutting wheel/ hack saw/ or steel braided hose cutters
* Duct tape or electrical tape (work best)
1.Measure your hose and find desired length.
2.Tape hose at measured length needed for application.
3.Cut hose threw the tape you have placed.(This keep the steel braid from fraying)
4.Remove the tape.
5.Slide one end of hose into end of fitting.
6.Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7.Make sure all connection are tight.