Hymnorq 13-Piece M35 Cobalt Drill Bit Set (1.5mm-6.5mm) with Metal Index Case, Fully Ground, 135° Split Point, Dual Twist Flutes, Ideal for Drilling Hard Metals Like Stainless Steel and Cast Iron;

M35 Grade Cobalt Steel

Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant.

135 Degree Split Point

The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90° and 118°. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut.

Lowest Cost Per Hole Drilled

Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled.

For Drilling Stainless Steel

This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

Tests shows that the M35 cobalt steel drill bits can penetrate a 5mm-thick 304 stainless steel plate in 5 seconds.

Not Suitable for Hardened Steel

M35 grade cobalt drill bits are NOT suitable for hardened steel, high carbon steel and heat-treated steel by the experiences of some customers, although some others said they worked well with hardened steel.

Cooling Liquid Required

Please use with cooling liquid to prolong the working life of the drill bits and to avoid overheating and breakage.

BUY WITH CONFIDENCE:

If you're not completely satisfied with the product quality, please contact us. Refund or free replacement.