Screen Replacement for iPhone 6S Plus Black 5.5 inch Giorefix LCD Display 3D Touch Screen Full Assembly Digitizer Assembled Kit Home Button,Front Camera, Earpiece with Repair Tools + Screen Protector;

Note:
▲ Only fit for iPhone 6s plus 5.5" ：(A1634/A1687/A1699), NOT for iPhone 6S.
▲ All the components above were Full Pre-assembled, convenient to install, save time. 
â–² The Touch ID function will only work with your phone's original home button assembly. You will need to transfer the button assembly from your old display to retain Touch ID.

Specification:
- Screen Size: 5.5 inches 
- Display: Multi- Touch (IPS tech) 
- Outer Glass: Corning Gorilla Glass 3 
- Resolution: 1920x1080 pixels (401ppi pixel density) 
- Front camera: 12 Megapixel

Main Parts:
1 x LCD touch screen+ digitizer touch panel assembly
1 x Front camera
1 x Ear speaker
1 x Front microphone
1 x Proximity sensor
1 x Light sensor
1 x Bezel frame
1 x 9H Tempered Glass Protector

NOTE: All the components above were pre-assembled. (Include Home Button, but there is no touch ID and fingerprint identification function) 

Repair Tools:
2 x Screwdriver 
2 x Pry Pick
1 x Suction Cup
  1 x Dust Wipe 
1 x Sim card pin 

NOTE: Screwdriver head with Magnetic. (Convenient for dealing with tiny screws)

Installation Instruction: 
1). Please check the LCD to make sure the flex cable is in good condition (DO NOT over-bend or use excessive force to tear it) and there is no debris on the connector.
2). Disconnect the battery cable before installation or make sure your phone is powered off. This will protect your phone from incorrect installation damage.
3). Please watch a video tutorial before installation. (Each customer will receive an email which contains the repair video url.) 
4). There are many screws when you replacing the assembly which are different in size and length. You'd better mark them otherwise it may broke the screen if you put the screw in wrong place.