Acrux7 6 Inch Hole Saw Blade - Professional hand tool that cuts perfect 6 inch diameter hole for corn hole board or other home decoration objects!
Specification:
Material: HSS High Speed Steel
Color: Red
Diameter: 6 inch / 152mm
Cutting Depth: 30mm
Feature:
-Non binding clean edge design which can be cut smooth and fast.
-Silicon carbide coating surface treatment to enhance rust-resistant.
-Built tough for repeat use and handy for working on corn hole board.
Package Included:
1 x 6 inch hole saw
1 x hex shank drill bit adapter
2 x extra drill bits
1 x extra hex wrench
ATTENTION:
IT DRILLS AS CLOCKWISE ROTATION
- 6 Inch Hole Saw Material - HSS carbon steel & Bi-metal steel, with high wear resistance and high toughness, and higher hardness, increased service life.
- Convenient and Efficient- Double metal strips and HSS teeth can be sharp and quick opening, reducing the opening time. Heavy duty hexagonal center shaft for use with any 1/2" electric drill, no restrictions. Cutting diameter is 6" / 150mm, Opening depth is 1-3/16"
- Using Method- Gently plunge the bit until the hole saw scuffs the surface of the wood.Slowly plunge through the cut without pushing when the saw begins to cut. Once the hole saw plunge through the opposite side of the wood, stop the drill.
- Package: 1 pack 6-in hole saw, 1pack hex shank drill bit adapter, 2 pack extra drill bits, 1 x extra hex wrench.
- Wide Range of Applications- Cutting holes for plywood, thin iron board(within 3mm), acrylic board, gypsum board, ducts(water pipe, besides the stainless steel), ceiling lights, can light(not for hard cement board), Perfect for Corn Hole Board Drilling and other home projects.
- 6 Inch Hole Saw Material - HSS carbon steel & Bi-metal steel, with high wear resistance and high toughness, and higher hardness, increased service life.
- Convenient and Efficient- Double metal strips and HSS teeth can be sharp and quick opening, reducing the opening time. Heavy duty hexagonal center shaft for use with any 1/2" electric drill, no restrictions. Cutting diameter is 6" / 150mm, Opening depth is 1-3/16"
- Using Method- Gently plunge the bit until the hole saw scuffs the surface of the wood.Slowly plunge through the cut without pushing when the saw begins to cut. Once the hole saw plunge through the opposite side of the wood, stop the drill.
- Package: 1 pack 6-in hole saw, 1pack hex shank drill bit adapter, 2 pack extra drill bits, 1 x extra hex wrench.
- Wide Range of Applications- Cutting holes for plywood, thin iron board(within 3mm), acrylic board, gypsum board, ducts(water pipe, besides the stainless steel), ceiling lights, can light(not for hard cement board), Perfect for Corn Hole Board Drilling and other home projects.
