Warm Note: This Photocell Light Switch only can be used for DC NOT AC. 12VDC 24VDC 36VDC 48VDC all can be used. But the input voltage should be the same as the voltage of the load.
Please follow the instructions in Figure 4 to install, do not install according to the surface of the product because many people will be confused about this. So please remember to see figure 4 before installation
Specification:
Type: Photocell Light Switch
Material: Plastic
Voltage: DC 8-50V
Working Temperature:-25~70°C
Related Humidity: 99%RH
Item Size: 4*3.7*1.5cm / 1.6*1.5*0.6" (L*W*H)
Net Weight: 0.02kg / 0.7oz
Package Including:
2*Light Sensor Switch
24 Months Guarantee!
Your satisfaction means everything to us. We are aim to offer the best quality and service.
Please feel free to contact us to fulfill your request promptly without any hassle. We will solve your problem within 24 hours.
A replacement or full refund will be guaranteed if you are not satisfied with the item. Thank you very much!
- ⭐Installation method: 3 wires: black, white and red. The black wire connects to the negative (-) DC source. Both the white wire and one of the lamp wires connect to the positive (+) DC source. Then connect the red wire to another lamp wire. (Please follow the instructions in picture 2 on the product page to install, not according to the surface of the product because many people will be confused)
- ⭐ Note: This photocell light switch can only be used for DC, not AC. 12V DC 24V DC 36V DC 48V DC all can be used. But the input voltage must be the same as the voltage of the load. Or it can't work
- ⭐Automatic on and off: the internal environment with automatic lighting detection circuit, turn off during the day and automatically open at night
- ⭐ Save Money: Uses a three-wire, resistor-compatible system. Low consumption, energy saving, long life, safe and reliable. Lighting time control according to the lighting value of the environment automatically
- ⭐ Save Money: Uses a three-wire, resistor-compatible system. Low consumption, energy saving, long life, safe and reliable. Lighting time control according to the lighting value of the environment automatically
- ⭐Installation method: 3 wires: black, white and red. The black wire connects to the negative (-) DC source. Both the white wire and one of the lamp wires connect to the positive (+) DC source. Then connect the red wire to another lamp wire. (Please follow the instructions in picture 2 on the product page to install, not according to the surface of the product because many people will be confused)
- ⭐ Note: This photocell light switch can only be used for DC, not AC. 12V DC 24V DC 36V DC 48V DC all can be used. But the input voltage must be the same as the voltage of the load. Or it can't work
- ⭐Automatic on and off: the internal environment with automatic lighting detection circuit, turn off during the day and automatically open at night
- ⭐ Save Money: Uses a three-wire, resistor-compatible system. Low consumption, energy saving, long life, safe and reliable. Lighting time control according to the lighting value of the environment automatically
- ⭐ Save Money: Uses a three-wire, resistor-compatible system. Low consumption, energy saving, long life, safe and reliable. Lighting time control according to the lighting value of the environment automatically
