DC 6V-12V to 80kV High Voltage Transformer Pulse Generator Inverter Super Arc Pulse Ignition Module;

Specifications:

Input voltage: 6V-12V current: 0.5A-2A
Input line length: 10cm/3.94inch
High Voltage type: DC type
Output voltage/Current: about 80KV / 0.5A

Output line length:10cm/3.94inch
High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better)
Note:

1.Input the power of 6-12v, output two levels of terminal can produce 1.5cm length purple high temperature arc, instant ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound.

2. 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board,  recommended capacity above 2000mAh) or Nickel-cadmium/Nimh battery pack, 4V or 12V lead Acid batteries(12V battery works best) 

Module Usage Precautions:

1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.

2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.

3. It's not easy for heat dissipation,don't let it work for long time.

4. Small capacity series lithium battery  is 7.2 V, voltage will drop to about 4V  when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.

Package Included:

1 x High Voltage Pulse Generator