Product details:
1.Port / Connecting Size M18 X 1.5 Center Thread
2.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
3.The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
4.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don't be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Product details:
1.Port / Connecting Size M18 X 1.5 Center Thread
2.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
3.The filter units are coated w...
Similar Products
