QLOUNI Lock Miter 2" Diameter 1/4'' Carbon Steel Shank 45 Degree Joint Router Bits for 3/4 Thick Wood Cutter Tool;

QLOUNI 45 Degree Lock Miter Router Bit

How to Use?
1 .Put the Lock Miter into the 1/4'' carbon steel shank router table or desktop woodworking engraving machine, please make sure that the chuck is tight and avoid loosening and causing it to throw out !!!
2.The wood is at 90°and this router bit cuts the shape out of the wood, needn't pre-cut;
3.Just one router bit, cut one edge and one face to get a 90 degree corner, it works great for frames or connecting joints.

Specification
Shank diameter: 1/2"(6.35mm)

Blade diameter: 2" (50mm)

Blade depth: 3/4"(19mm)

Applicable to the size of the board:12.7-19mm (3/4 inch is the smallest recommended material thickness)

Material: Carbon steel handle + YG6X native alloy, Anti-Kickback Design

Tips
Please allow a 0.5-1.5 mm bit manual measuring errors.

Safety Instructions
1 .The Lock Miter with 1/4'' carbon steel shank router table or desktop woodworking engraving machine, please make sure that the chuck is tight and avoid loosening and causing it to throw out !!!
2. It is very important to use the normal casing size, the tool must be fully inserted into the casing and tighten firmly, so that we can use in the process of cutting tool must provide clamping force, not only partially inserted into the casing, otherwise it will lead to fracture caused damage to the tool shank.
3. The joint bit suitable for woods, MDF, particle board, plywood compact panel, avoid cutting metal, otherwise it will break.
4. When the drill is used, it may cause the surface paint to fall off due to friction.
5. The bladed product is not use for people under 18 years. When not in use, please put in the box, (with a plastic box)

Package Included
1x router bit in a plastic box